6 Mistakes to Avoid at a Crime Scene Straight From a Cold Case Detective

Photo: Courtesy of coldcasesquad.com

Crime scenes aren’t as cut and dry as one might think.  There are many variables and each one should be carefully identified, searched, documented, and processed correctly.  The process doesn’t flow like the television shows or movies would like us to think.

Here’s a great article I wanted to share on “6 Mistakes to Avoid at Crime Scene” from a retired NYPD police detective and cold case expert, Joe Giacalone.  It doesn’t get any better than learning it straight from the source.


Great information for crime authors and mystery writers.

 

***

6 Mistakes to Avoid at a Crime Scene

Crime Scene Mishaps:

By: Joseph L. Giacalone

You don’t get a chance to scream, “Do over!” like we did in the playground when it comes to criminal investigation. You only get one chance at it, so you have to do it right. Sometimes, doing something right is about learning what not to do. Crime scenes are so fragile that just about anything you do can cause crime scene contamination. The moment that the first uniformed officer enters the scene, it is contaminated.

Investigators must be ready for that question on the stand, “Was the crime scene contaminated before you arrived?” The answer to this question is always an unequivocal, “Yes, it was counselor, ” followed with an explanation if allowed. Crime scene contamination is unavoidable in law enforcement’s quest to render aid to the victim or obtain evidence. However, law enforcement can mitigate contamination by avoiding these six (6) deadly crime scene mistakes:

1.  Not Controlling Police Personnel

The biggest problem in any crime scene are your fellow officers and therefore the most important appointment is to choose a “Gatekeeper.” The Gatekeeper’s job is to maintain the integrity of the scene, keep a list of who entered the scene and to prevent unauthorized personnel from gaining access. Some officers inadvertently contaminate the crime scene when they were assigned “the job,” while others like to show up to gawk. These officers pose the most difficult aspect of maintaining the crime scene for the gatekeeper.

2. Not Identifying Evidence

When processing a crime scene you have to have an open mind. If you are only looking for certain items, that is all you will find. Don’t miss the forest for the trees. If you think it has the potential to be probative evidence, then take it with you. There is nothing worse that finding out hours later that you left an important piece of evidence behind.

3. Not Documenting Interviews / Evidence / Etc.

If the investigator doesn’t take the time to document parts of the case then the entire case could be jeopardized. If the reports aren’t filled out, then that information will be lost forever. Worst yet, a poorly documented case opens it up to rightful criticism by the defense counsel. They will point out that certain things weren’t documented because they were exculpatory – meaning they would eliminate his / her client as a possible suspect. If it wasn’t recorded, it never occurred.

4. Not Taking Enough Photographs

The old mantra of a crime scene techs that I used to work with was, “Film is free.” The case investigator is the one that will be explaining themselves in a courtroom, so they need to learn how to take charge. You can never have enough photographs. More is better, for sure. Photographs play an important role as demonstrative evidence in a courtroom, a memory aid for investigators, a reference for cold case detectives and the opportunity to identify something that was originally missed.

5. Not identifying Secondary or tertiary crime scenes

The primary crime scene is always where the initial incident took place, unless it is a homicide, then it is where the body was found. Once again, the investigator cannot operate with blinders on. For instance, if the location is a “dump site” (murdered elsewhere and left the body in another location) then you have to think that a vehicle was probably used, therefore another potential crime scene. Other areas to think about are points of entry and egress, alleys, rooftops, elevator landings, staircases, etc. An investigator should always think of potential secondary and even tertiary crime scenes in every case.

6. Taking crime scene photos with people standing in the background

Nothing screams crime scene contamination or mismanagement more than rolls of film with both uniformed and investigators standing in the midst of the scene-some for no apparent reason. Crime scene photos should be taken when the scene is as pristine as possible. The proper way a crime scene should be documented is: Photo, Sketch, Search and Collect.

By no means is this an all and inclusive list of what could go wrong at a crime scene, however, these are the six (6) most likely scenarios. In addition, I have one more tip to share and it has to do with EMTs. Always ask the EMTs to clean their stuff up before leaving the scene. If not, you run the risk of having blue gloves, plastic wrappings, bandage wrappings, etc. flying around your crime scene. Also, if possible, ask them not to cut through the bullet / knife holes in the victim’s shirt when they are removing  his / her clothes.

By the way EMT stands for: Evidence Mangling Technician

* * *

Author Blog: http://authorjenniferchase.com/
Crime Watch Blog: http://emilystonecrimewatch.wordpress.com/
Book & Crime Talk:  http://blogtalkradio.com/jennifer-chase
Books: Compulsion  Dead Game  Dark Mind  Silent Partner  Screenwriting

Views: 149

Comment

You need to be a member of CrimeSpace to add comments!

CrimeSpace Google Search

© 2024   Created by Daniel Hatadi.   Powered by

Badges  |  Report an Issue  |  Terms of Service